Skip to content

Australian Awnings

PRODUCTS

Home » Products » Carb-o-lite Poly Carbonate Awnings

Products

Carb-o-lite Poly Carbonate Awnings


CARB-O-LITE Patio Covers come in a variety of shapes and sizes

Bullnosed patio covers and the Flat patio covers are the traditional look suiting older style houses. The poly carbonate sheets are heat formed in our factory and the end of each sheet is heated and curved to the radius. Normally, 8mm twin wall sheets cannot be bent that tight but the heat in the oven allows the sheets to soften and sag and then the sheet is curved around a steel barrel to form the curve. The sheet is then cooled.

The bullnose uses 380mm of sheet. Gutters can be attached to the front.

Flat Patio Covers are becoming more and more popular as they represent the modern straight lines in todays modern architecture. Often put on a 4-5 degree fall to allow water run off, gutters can also be attached for water diversion.

Both patio covers use aluminium box sections as the support structures. These member sizes vary depending on how far out the patio covers (i.e. the further the projection, the larger the beams).

Flat Patio Covers are becoming more and more popular as they represent the modern straight lines in todays modern architecture. Often put on a 4-5 degree fall to allow water run off, gutters can also be attached for water diversion.

Both patio covers use aluminium box sections as the support structures. These member sizes vary depending on how far out the patio covers (i.e. the further the projection, the larger the beams).

The joining bars for the sheets are also curved for bullnosed or flat. The aluminium used is a curving quality temper meaning it can be cured without stress. Our rolling machines allow a complete curve if necessary.

There are many other types of Carb-o-lite awnings to suit you whether being window awning or carport awning, we can give you a quote today

Projects

OUR GALLERY